Advanced material and application
Production of external thread by means of enveloping with hob cutter
E.V. Glushko, N.T. Morozova & N.A. Glushko
Comparing between OECD member countries based on S&T innovation capacity
S.R. Lee & S.S. Chun
Dependence of the coercive force on the size of the core/shell nanoparticles magnetite/titanomagnetite
M. Shmykova, L. Afremov & I. Iliushin
The interaction between contacting barrier materials for containment of radioactive wastes
H.C. Chang, C.Y. Wang & W.H. Huang
Structural and technological patterns of formation of surface nanostructured layers TiNiZr by high-speed flame spraying
P.O. Rusinov & Zh.M. Blednova
Determination of a constitutive relation for damage of Al-Si-Cu alloy (ADC12)
Y.M. Hu, H.R. Zheng, Z.F. Li, X.Q. Jin & Y.E. Zhou
Study on phase transition of metallic materials by Specific Volume Difference Method
K.J. Liu, W.Y. Fu & S.L. Ning
A review on research and application development of Super Absorbent Polymer in cement-based materials
W.Q. Bai, J. Lv, Q. Du & H.H. Wu
The effect of reducing agents on GO/manganese oxide composites for super-capacitors
F.F. Ding, N. Zhang & C. Zhang
The properties of cementitious materials in prolonged curing
X.T. Yu, P. Gao, X. Wang & Y.D. Liao
Dynamic tensile behavior of Flattened Brazilian Disc of TiB2-B4C composites
Y.B. Gao, W. Zhang, T.G. Tang & C.H. Yi
Dibenzothiophene adsorption on Activated Carbons and its water effect
Z.J. Li, S.L. Jin, S.M. Zhang, N. Jiang, X. Shao, M.L. Jin & R. Zhang
The preparation and desulfurization performance of carbon aerogels in-situ loaded with copper for fuel oils
S.M. Zhang, Z.J. Li, N. Jiang, H.F. Zhang & R. Zhang
Synthesis of Ni-loaded carbon aerogels by in-situ and incipient wetness methods and their adsorption performance for dibenzothiophene in model fuel oil
N. Jiang, S.L. Jin, X. Shao, H.F. Zhang, Z.J. Li, S.M. Zhang, M.L. Jin & R. Zhang
An experimental technique to investigate gas-turbine blades dry-friction dampers efficiency
M. Nikhamkin, N. Sazhenkov, S. Semenov & I. Semenova
A nonlinear compressive response of polypropylene
H. Zheng, Y.G. Liao, K. Zhao & Z.P. Tang
Comparative investigation into the catalytic efficiency of Ni and Fe in the formation of carbon coils
H.J. Kim, G.H. Kang, J.K. Lee & S.H. Kim
The effect of orifice head loss coefficient on the discharge of throttled surge tank
S. Palikhe & J.X. Zhou
Effect of an enclosed cage structure on the chain characteristics of TSP-POSS/PU hybrid composites
R. Pan, L.L. Wang & Y. Liu
The preparation, characterization and properties of La2O3/TPU nano-composites
C.F. Wang & R.P. Jia
Analysis on the thermal decomposition process for the preparation of cobalt-doped zinc oxide from oxalate
J.W. Li & S.X. Guo
Compensating the shrinkage and expansive stress of CaO-based Expansive Additives treated by thermoplastic polyacrylic esters
R. Wang, W. Xu, Q. Tian & J.Y. Jiang
Effect of the pH level of the electrolyte on the photocatalytic performance of TiO2 nanotubes
C.S. Chen, S.Z. Yi & C. Wang
Forming limit prediction of 5182-O aluminum alloy sheet using finite element analysis
R. Kurihara, S. Nishida, H. Kamiyama & R. Okushima
Fabricating polymer films on a super-hydrophobic surface by the blow film method
Y. Ma, J.L. Zhao, K. Li, J.J. Zhang, C.M. Kang, H.Z. Zhang & X.Y. Zhang
Microelectrode-based sensor for detecting viability and activity of cells
X. Zhu
Impact of the microstructure and texture on the elastic modulus in an electron beam-welded near-α titanium alloy joint
X.Z. Li, S.B. Hu & J.Z. Xiao
Considering air compressibility in analyzing gap pressure in the partially porous aerostatic journal bearing
T.Y. Huang, S.Y. Hsu & B.Z. Wang
Structural and optical studies of thermally evaporated NiPc thin films
V. Mekla & C. Saributr
Effect of carbon content on the properties of LiFePO4/C synthesized by hydrothermal stripping technique
G.Q. Wan, P.F. Bai, J. Liu, X.M. Zu, L. Chen & X.Y. Wang
Optimization of ultrasound-assisted extraction conditions for active substances with anti-tyrosinase activity from tomatoes
J. Han & G.M. Gong
Purification and properties of nitrite reductase from lactobacillus plantarum
Y. Zhou & G.M. Gong
The influence of on semi-flexible airport pavement material working performance by porosity
B. Yang, X. Weng, J. Liu, L. Jiang, J. Zhang, P. Liu & X. Wen
Electrochemical detection of baicalin at a carbon nanosphere-modified electrode
Z.F. Wang, L. Shi, G.Z. Gou, A.P. Fan, C. Xu & L. Zhang
Pt/C catalyst for methanol electro-oxidation and oxygen electro-reduction in DMFC
Z.F. Wang, L. Shi, G.Z. Gou, A.P. Fan, C. Xu & L. Zhang
Pt/C-modified Glass Carbon Electrode for the determination of Dopamine, Uric Acid and Ascorbic Acid
Z.F. Wang, L. Shi, G.Z. Gou, A.P. Fan, C. Xu & L. Zhang
Electrochemical sensor based on Polyaniline-modified Graphene Nano-composites for dopamine determination
L. Shi, Z.F. Wang, G.Z. Gou, Q.S. Pan, X.L. Chen & W. Liu
Electrochemical sensor for ascorbic acid based on graphene-polyaniline nano-composites
L. Shi, Z.F. Wang, G.Z. Gou, Q.S. Pan, X.L. Chen & W. Liu
Influence of low firing temperature on the characteristics of Positive Temperature Coefficient of Resistance and the Ni internal electrode of multilayer Ba1.005(Ti1-xNbx)O3 ceramics
X.X. Cheng, B.W. Li, Z.X. Zhao & X.X. Li
Effects of interstitial impurity content on the plastic deformation behavior in austenitic steel monocrystals
S. Barannikova, A. Malinovsky & D. Pestsov
An experimental method of the cutting force coefficient estimation of grey cast iron FC25
N.T. Nguyen, M.S. Chen, S.C. Huang & Y.C. Kao
Changes in the state of stress in enclosing panels after additional thermal insulation
C. Radim, B. Kamil, M. Petr & L. Jana
Slag from Biomass Combustion (BCS)—chemical properties in accordance with BCS utilization in cement concrete
F. Khestl, P. Mec, M. Turicová & V. Šulková
Fundamental thermo-elastic solutions for 2D hexagonal Quasicrystal
T. Wang
Effect of induction heating power on zinc-coating quality
F. Fang, Y.M. Chen & L.X. Wang
High-temperature deformation and strain measurement for aircraft materials using digital image correlation
A.P. Feng, J. Liang, H. Hu & X. Guo
Material selection of auto-body plates based on simplified models
Y.W. Luo, A. Cui, Q. Xu & S.Z. Zhang
MFC/NFC aerogel-Ag composite and its application
J.H. Yan, G.B. Kang & R.M. Xu
Nanopaper with Ag composite and its application
J.H. Yan & R.M. Xu
Effective thermal conductivity of multiple-phase transversely isotropic material having coupled thermal system
S.A. Hassan, A. Israr, H.M. Ali & W. Aslam
Using optical methods to determine high resolution Coefficient of Thermal Expansion of materials
S.A. Hassan, H.M. Ali, M.A.A. Khan, W. Aslam & M.H. Ajaib
Study on the properties of W-C infiltrated strengthening layer on H13 steel surface formed by plasma alloying
H.P. Zou & M.W. Chen
Petrographic and chemical assessment of siliceous limestone for cement production suitability
N. Bouazza, A. El Mrihi & A. Maâte
Structural and civil engineering
A study on the fatigue strength of a truck in railway applications
S.C. Yoon
A method for constructing a simplified model of wire strand cable
Y.M. Hu, X. Tan, B.W. Zhou & J.S. Li
Synergistic interaction of scaling and abrasion on the fly ash concretes
A. Nowak-Michta
Performance comparison analysis of SUP-13 Lucobit asphalt mixture
Y.M. Zhang, M.L. Zheng & K. Wang
Quantitative inspection of ferroconcrete damage by using ground-penetrating radar
C.W. Chang, C.H. Lin, C.C. Jen, C.A. Tsai, H.Y. Chien & P.S. Huang
Properties of the advanced sulfur-bituminous pavements
E.V. Korolev, V.A. Gladkikh & V.A. Smirnov
Application research on concrete recycled aggregate of construction waste in the road base
T.Z. Ming, K. Wang & G.W. Hu
Design an angle-inserting joint for steel sandwich panel
X.J. Wu, F.L. Meng & X.G. Meng
Green Building Development system modeling and simulation
J.Y. Teng, L.M. Zhang, J.B. Zhong, C.Y. Du & H.Y. Chen
Corrosion measurement of galvanic cell-type concrete sensor
J.A. Jeong & J.M. Ha
The analysis of air flows near the windbreak constructions on offshore structures
I.V. Dunichkin
Research on the construction technique for integrated control of embankment settlement due to extending of pile platform into subgrade
X.Q. Wang, Y.L. Cui, S.M. Zhang, B.C. Qian & F.L. Li
Research on the construction technology of self-water stopping pit support structure of pre-stressed pipe piles
X.Q. Wang, Y.L. Cui, S.M. Zhang, J. Song, M.G. Zhang & R.G. Lin
Incentive contract design of construction engineering time based on the principal-agent model
L. Yan & X.J. Tang
Studying of the influence to property of road base with cement stabilized gravel by the iron tailings sand
L. Hongbin & Z. Jiannan
Durability of concrete to sulfate attack under different environments
B.H. Osman, E. Wu, B. Ji & A. Ishag
Experimental study on particle drift velocity in single-stage double-vortex collecting plate ESP
C.W. Yi, Y.N. Huang, J. Zhang, H.J. Wang & C.X. Lu
Synthesis and modification of polyurethane type track
X.H. Zeng, J.P. Luo & H.Q. Hu
Recognition of traffic signs using local feature multi-layer classification
Y. Ye & X. Hao
Detection of traffic signs based on multi-feature high credibility regions
Y. Ye & X. Hao
The role of cementitious materials in building materials
F.Q. Zhang
Time-domain buffeting analysis of suspension bridge under non-stationary typhoon excitation
Y.L. Qiu, W.H. Guo & J.Q. Wang
Mechanism analysis for punching shear strength of hollow flat slabs
K.H. Yang, S.H. Yun & S.T. Park
Establishing a Decision Support Module for bridge maintenance in Taiwan
N.J. Yau & H.K. Liao
Strut-and-Tie Model for shear capacity of squat shear walls
J.H. Mun, W.W. Kim & K.H. Yang
Abnormal vibration analysis of a metro vehicle
H.Q. Liu & H.Y. Dai
Structure health monitoring using the matched chaotic excitation
D.D. Yang, H.G. Ma & D.H. Xu
Evaluation of consulting firms for Mass Rapid Transit projects
N.J. Yau & C.H. Sun
Flexural behavior of hollow deck-plate slabs with simplified construction procedure
K.H. Yang, M.K. Kwak, S.H. Yun & S.T. Park
Diffusion model and damage development of concrete exposed to freeze-thaw cycles
L. Jiang, X.Z. Weng, B.H. Yang, R.Y. Zhang, J.Z. Liu & X.C. Yan
Fundamental properties of lightweight foam soil concrete using high volume Supplementary Cementitious Materials
K.H. Lee & K.H. Yang
Fatigue stress–strain relationship of normal- and light-weight concrete mixtures under axial compression
J.S. Mun, K.H. Yang & S.J. Shin
Performance parameters of concrete and asphalt-concrete surfaces
J. Rajczyk, M. Rajczyk & J. Kalinowski
Pedestrian-induced vibrations in footbridges: A Fully Synchronized Force Model
M.A. Toso & H.M. Gomes
Shrinkage of phosphoaluminate cement concrete
W.J. Long, X.W. Xu, J.G. Shi, S.F. Zhao & X.L. Fang
Road surface micro- and macrotexture evolution in relation to asphalt mix composition
T. Iuele
Effect of welding speed on the micro-hardness and corrosion resistance of similar laser welded (304/304) stainless steels and dissimilar (304/A36) stainless and carbon steels
M.M. Tash & K.M. Gadelmola
Mechanical and industrial engineering
Reliability of detection of Glass Break in Intrusion and Hold-Up Alarm Systems
V. Nidlova & J. Hart
A system utility analysis of Multiple Launcher Rocket System
H.F. Wang, C.W. Han & C. Zhao
The influence of sintering temperature on microstructure and electrical performances of (1-x)BCZT-xCuO lead-free ceramics
J.J. Jiang, P. Xu & Q.B. Liu
Effect of Li on the microstructure and electrical properties of BCZT-xLi lead-free piezoelectric ceramics
L.L. Yao, X.Q. Huang & Q.B. Liu
The key controlling factors of tight sandstone reservoir of the lower Shihezi formation in Linxing area in eastern Ordos Basin
D. Zhao, H. Xu, D.Z. Tang, L. Li,T.X. Yu & S.Z. Meng
Q&P process in manufacture of hollow products
B. Masek, K. Opatova & I. Vorel
Generalized-K (GK) distribution: An important general channel model for mobile fading channels
Y. Li
Thin-layer element modeling method of aero-engine bolted joints
X.Y. Yao, J.J. Wang & X. Zhai
The effect of controlled cooling after hot rolling on the microstructure and mechanical properties of LX72A
M. Jia & J. Liu
A finger-interaction-based LED control system
S.W. Jang, K.H. Seok & Y.S. Kim
Development of a SMPS system using LLC resonant converter for high efficiency LED driver
J.H. Ko & Y.S. Kim
Numerical test derivation of the computational formula for the composite modulus of high-speed rail substructure composite foundation
H.R. Wei & G.L. Zhang
Thermal diffusivity and electrical resistivity measurements of a 30CrMnSiA rolled steel sheet under different thermal conditions
W.Q. Khan & Q. Wang
Microstructure and mechanical property of TiC/Ti composite layer fabricated by laser surface alloying
J.J. Dai, J.Y. Zhu, S.Y. Li, L. Zhuang, A.M. Wang & X.X. Hu
Specification of aeroelastic model design for further aerodynamic experiments
O.O. Egorychev & O.I. Poddaeva
An approach to view factor calculation for pool fires in the presence of wind
J.L. Zhao, H. Huang, M. Fu & B. Su
How construction industry safety climate affect migrant workers’ safety performance: A structural equation model-based analysis
Q. Liu, Y.H. Wang, L.M. Zhang, C.Y. Du & H.Y. Chen
A study on a turbine blade riveting device design by using finite element analysis and experiments
G.J. Kang & B.Y. Moon
Single-machine scheduling with past-sequence-dependent setup times and sum-of-logarithm-processing-times-based learning considerations
X.G. Zhang & Q.L. Xie
A strategy for assembly using active compliant for industrial robots with F/T sensor
T. Zhang, B. Wang & J.J. Lin
Longitudinal contact analysis of gear pair with alignment error
J. Xiao, X.C. Gui, Q. Sun & Y.H. Sun
The study on mechanical properties of Carboxymethyl Chitosan hybrid PVA hydrogels
J.P. Luo, H.Q. Hu & X.H. Zeng
The study on mechanical properties of semi-IPN hydrogels consisting of crosslinked PNIPA network and linear Carboxymethyl Chitosan
J.P. Luo, H.Q. Hu & X.H. Zeng
The study of the transmission mechanism of landslide-generated waves and the research of the landslide surge effect on dam
S.L. Wu, H. Peng, J.L. Zhang, M. Li, J. Deng, G.D. Ma & Q.Q. Jiang
Mechanical behaviors of three-dimensionally free-form titanium mesh plates for bone graft applications
M. Watanabe, J. He & S. Suzuki
Research on the basic mechanical properties of an axial pre-compressed piezo-electric bimorph actuator
K.M. Hu & L.H. Wen
Automatic control system for strengthening and polishing equipment
J.H. Tao, Z.F. Huang, Z.H. Guan, J.H. Zhang, Y.W. Bao & C.P. Jin
Research on the dynamic simulation of armored vehicle’s steering control based on man-machine interface matching
W.P. Liu, B.H. Fu & J.F. Nie
Design and development of an expert system for rural biogas engineering
M. Zhou & Z.Y. Zou
Research of an intelligent dynamic reactive power compensation device based on a single chip microcomputer
G.S. Zhang, M.R. Zhou & Y.N. Zhu
Research on the magnetic vibration control method of the electric hammer
H. Zhang
Flutter analysis of the rotating missile’s variable cross-section empennage by the Differential Quadrature Method
B.B. Zhao, R.Z. Liu, R. Guo, L. Liu & X.C. Xu
Impact and screw-holding strength of four bamboo-based panels
J.B. Li & M.J. Guan
The effect of carbonized treatment on the wettability of poplar veneer and the shear strength of plywood
M.G. Xue & M.J. Guan
Nonlinear undamped vibration frequency of rectangular pretension orthotropic membrane under impact force
Y.H. Zhang, C.J. Liu & Z.L. Zheng
Response to acoustic pressure of microstructured optical fibers: A comparison study
A. Abdallah, C.Z. Zhang & Z. Zhong
Study on heat transfer and recuperator effectiveness for microturbine application: Channel of rectangular with semicircular ends
S. Rilrada, M. Thanate & N. Udomkiat
Role of the hydration force in the swelling pressure of montmorillonite
Z.Q. Huang & X.C. Huang
A study on the experimental teaching reform of digital electronic technology offered by schools run in the model of Chinese-foreign cooperation
Y.L. Li & J. Gao
Methodology of the analysis of kinetic energy dispersion
J. Rajczyk, M. Rajczyk & J. Kalinowski
Portable system for measuring torsional vibration in turbo-generators
J.Z. Liu & T. Zhao
Design of a yaw damper for the aircraft model
M.X. Shen, X.L. Li & X.Y. Ruan
Design of mechanical pre-stressing system for strengthening reinforced concrete members with pre-stressed NSM FRP bars
S.S. Abdulhameed, E. Wu & B. Ji
A new shearer monitoring system based on ZigBee and wireless sensor network technology
W.H. Li & L.H. Zhou
Fast spiral scanning based on Switched Capacitor Charge Pump
J. Zhang, L.S. Zhang & Z.H. Feng
Experimental investigation on the ultimate strength of partly welded tubular K-joints
R. Cheng, W. Chen, Y. Chen & B. Zhou
The influence of cooling intensity on structure of blow molded products
P. Brdlik & M. Borůkva
Research on the monitoring measurement of using a shallow tunnel to expand to a large section multi-arch tunnel in situ
Y.D. Zhou, Y.L. Jia, Y.X. Xia & F. Ye
Research on product development gene oriented to process reuse
Z.H. Wang, S.R. Tong & J. Li
Computer aided for engineering application
Operation of functional parameters of video-verification integrated into I&HAS
J. Hart & V. Nidlova
Model for selecting project members to minimize project uncertainties
C.C. Wei, H.J. Tsai, Y.F. Lin & C.S. Wei
Real-time simulation research on an electric drive system
Y.Y. Zhang, X.J. Ma, C.G. Liu & Z.L. Liao
A research on the optimization of an anti-whiplash injury seat system
S.W. Zhou, S. Han, C. Sun, Y.R. Shi & C. Zhang
Calculation of a thick-walled inhomogeneous cylinder of a nonlinear-elastic material
V.I. Andreev & L.S. Polyakova
Nonlinear modeling of the kinetics of thermal stresses in polymer rods
V.I. Andreev & R.A. Turusov
The research of TD-Music location algorithm based on a virtual planar array model of space distributed nodes
P. Zhao, H.F. Yao, J. Liu, W.Z. Shi, W.H. Wang, K. Zhang, Y.H. Ma & B. Li
Effect of the grid discrete error on the symmetry of topological optimization results
J. Fan, Z.Y. Yin, J.J. Wang, Y. Xiao & C. Chen
Design of 16-QAM system based on MATLAB
J.H. Huang
Wavelet analysis of the inter-annual change of typhoons striking Guangdong Province
Q.Y. Zhang, S.B. Zhong & Q.Y. Huang
Detection of radome defects with a new Holographic Subsurface Imaging Radar system
S.Z. Xu, M. Lu, C.L. Huang & Y. Su
The database design for the remote monitoring of an injection molding plant
O. Paudel & C.S. Gao
Hybrid method for prediction of centrifugal pump noise and optimization
G.Q. Liu, T. Zhang, W. Zhao & Y.O. Zhang
A new recognition algorithm of the lunar mare area based on the DEM contrast
X.L. Tian, A.A. Xu, T.L. Xie, H.K. Jiang & J.L. Wang
The finite element analysis on a roll system of a 20-high Sendzimir mill based on ABAQUS
M.M. Zhang, X.B. Liu & F.Q. Feng
Study on life cycle cost for the wheel re-profiling strategy
C.Y. Ren, C. Liang & M. Zheng
A condition warning method of primary equipment considering daily load regularity
J.S. Li, Y.C. Lu, C. Wei, F.B. Tao, P. Wu & M. Yu
Optimization design of automotive shroud part to reduce warpage in injection molding by using the finite element method
G.J. Kang & B.Y. Moon
Parametric analysis of an airfoil aeroelastic system with hysteresis using precise integration method
C.C. Cui, J.K. Liu & Y.M. Chen
A prediction method of dynamic cutting force in the milling process of S45C by flat-end mill cutter
N.T. Nguyen, M.S. Chen, S.C. Huang & Y.C. Kao
The development and philosophical thought for three generations of Artificial Neural Networks
Q. Liu, X.P. Yang, S.W. Han & X.S. Ma
Single Degree of Freedom (SDOF) and finite element analysis of steel column subjected to blast load
M.M. Abdallah & B.H. Osman
Improved Genetic Algorithm for solving large square jigsaw puzzles: An initial exploration
Y.D. Zhang, S.H. Wang, G.L. Ji, S.W. Chen, Q. Wang & C.M. Feng
Structure design and knotting tests of a type of anthropopathic dual-finger knotter
W. Zhang & J. Yin
Die forming of hollow pipe for wall thickness increasing and FEM analysis
H. Kamiyama, S. Nishida, R. Kurihara & M. Fujita
Equivalent strain analysis of piercing process in Diescher’s mill using finite element method
L. Lu & E. Xu
Logistics service quality evaluation model of B2C mode network shopping based on the AHP-BP neural network
C. Deng, P. Sun & R. Pan
Study and application of variation propagation of multi-station assembly processes with compliant autobody parts
A. Cui, S. Zhang, H. Zhang & Y. Luo
Numerical simulation of the whole failure process of rock under various confining pressures
J. Jia, B.L. Xiao & C.R. Ke
Computation and analysis of the caisson wharf
Y. Shi, Q.C. Ning, X. Yang, R. Chen & K. Cui
Numerical simulation of particles’ acting force on the blades of the rotary valve
X.S. Zhu & L.W. He
Behavior of prestressed composite steel-concrete beam during assembly: Numerical modeling
M. Karmazinova & T. Vokaty
Study on EME denoising based on adaptive EEMD and Improved Wavelet Threshold
Z. Yang, J. Cai, G.F. Liu, X. Li & D.D. Ye
Mathematical approaches to evaluating plastic hinge region of flexure-governed shear walls
K.H. Yang
Design of an IOT-based intelligent control system for flower greenhouse
Z. Zhiyong & Z. Man
Probabilistic loss estimates of non-ductile reinforced concrete frames
C.L. Ning
A simplified swelling pressure models for expansive soils based on a nonlinear fitting function
C.W. Yan, Z.Q. Huang & X.C. Huang
The basic study of introduction for the certification system of infill in South Korea
E.K. Hwang, S.R. Park & S.A. Kim
Analysis of geometric nonlinear free vibration of pretensioned rectangular orthotropic membrane structure
Y.H. Zhang, C.J. Liu & Z.L. Zheng
Virtual reconstruction: A brief analysis on the architecture developments of the digital technology era
Y.H. Zhang & Q. Yan
Identifying resolution controlling parameters in the design of Coefficient of Thermal Expansion measurement tool
S.A. Hassan, H.M. Ali, W. Aslam, M.A.A. Khan, M.H. Ajaib & H. Moin
Summary of intelligent power grid fault diagnosis methods
Z. Yu & C. Chen
A novel modified UWB model for multiple cluster
M.X. Shen, X.L. Li & X.Y. Ruan
Contribution to quality research: A literature review of the SERVQUAL model from 1998 to 2013
Y.L. Wang, T.Y. Luor, P. Luarn & H.P. Lu
Civil material and hydrology science application
Waterproof curtain stability analysis of deep foundation pit near lakes or rivers
F.T. Lu, Y.J. Zheng, L.X. Li & S.L. Zhang
Explicit method of solving critical water depth and critical slope of the triangular channel section
H.Y. Gu, Y.C. Han, T.Q. Peng, S.H. Wang & L. Fu
Simulation and analysis of the liquid cargo replenishment of the ship
W. Deng, D.F. Han & W. Wang
The study on swelling behavior of semi-IPN hydrogels consisting of crosslinked PNIPA network and linear Carboxymethyl Chitosan
Y. Chen, W.Y. Liu, G.S. Zeng & J.H. Yang
Analysis on installation accuracy system of fluid floating coupling
Z. Li & W.C. Wang
Study on the two-dimensional magnetic buoyancy force fields inside ferrofluids
X.Q. Jiang & R.L. Jiang
Effect of drop size on the rheology of water-in-oil emulsion
W.Y. Wang & C.W. Liu
Optimization of viscosity model for water-in-oil emulsions
W.Y. Wang
Effect of sintering conditions on performances of LiFePO4 cathode material obtained by liquid-phase method
X.M. Zu, P.F. Bai, J.J. Ma, X.Y. Wang & W.R. Zhao
Viscosity measurement of Newtonian fluids using an in-plane torsional piezoceramic discal resonator
G.J. Xiao, C.L. Pan, Y.B. Liu & Z.H. Feng
Research on the clamping device of the underwater wire rope cutter
Z. Hui
A new type system of pressure regulating and water conveyance based on small and middle hydropower station
S. Feng, Z.M. Su, Y.Z. Yan & F.H. HuangFu
A study on the characteristics and trends of domestic long-life housing research in South Korea
S.R. Park, E.Y. Kim & E.K. Hwang
Explicit normal water depth formulae and optimal economical section of the triangular channel
H.Y. Gu, Y.C. Han, T.Q. Peng & Y. Gao